SCR Compressor

Refrigeration Dryer(High Temp)

lnlet Air Temperature:Rating::65℃; Maximum:80℃
Pressure Rating: 0.7 Mpa Applicable Range:0.3-0.95 Mpa
Environmental Temperature: Air-cooling Type:= 2 ℃,=38℃
Water-cooling Type:= 2 ℃;=45℃
Pressure Dew Point: 2-10 C (0.7Mpa)
Cooling Water Temperature:T inlet =31℃;T outlet=37℃
Cooling Water Pressure:0.15-0.4 Mpa

inquiry
product video
product advantages
  • 1 Ripple pipelines

    Ripple pipelines of the heat exchanger increase the using rate of cooling air.

  • 2 Evaporator

    Evaporator is made from laminose copper pipeline with aluminum flake, high efficiency and low energy consumption.

  • 3 Drainage System

    Good drainage system, adopts 3 gardes for draining, drain out lots of condensate water and oil, so as to keep clean and dry compressed air.

  • 4 Easy for Installation

    Easy for installation and free-maintenance.

  • 5 Condenser Made From Fin Copper

    Condenser made from fin copper, good heat exchanging rate without freeze and jam.

product parameter
Model SCR- Capacity Power Enter/Exit/ Connector Dimension Weight
m³/min V/Ph/Hz Compressor
(kW)
Fan (kW) LxWxH mm kg
SCR-0012HTF 1.2 220/1/50 0.59 0.1 G1" 650*450*820 87
SCR-0023HTF 2.3 0.75 0.18 G1.5" 800*500*820 105
SCR-0036HTF 3.6 0.885 0.3 G1.5" 900*500*820 116
SCR-0052HTF 5.2 1.25 0.3 G1.5" 1000*520*930 150
SCR-0065HTF 6.5 1.69 0.3 G1.51" 1000*580*980 190
SCR-0085HTF 8.5 1.85 0.36 G2" 1120*580*990 210
SCR-0110HTF/W 11 2.1 0.36 G2" 1200*580*1010 270
SCR-0135HTF/W 13.5 380/3/50 2.34 0.36 G2" 1300*620*1060 290
SCR-0170HTF/W 17 2.98 0.78 DN65 1450*700*1285 360
SCR-0220HTF/W 22 4.4 0.78 DN80 1620*780*1520 486
SCR-0270HTF/W 27 4.95 0.96 DN100 1760*800*1530 570
SCR-0320HTF/W 32 6.75 1.52 DN100 1900*1000*1680 700
SCR-0420HTF/W 42 7.5 1.52 DN100 2100*1100*1750 860
SCR-0550HTF/W 55 9 2.28 DN125 2160*1200*1750 1060
SCR-0650HTF/W 65 11 2.28 DN150 2160*1300*1775 1180
SCR-0850HTF/W 85 13.7 2.4 DN150 2500*1720*2130 1370
SCR-1100HTF/W 110 17.7 3.85 DN150 2670*1720*2190 1500
SCR-1400HTF/W 140 26.9 6.05 DN150 2700*1500*2300 1600
Related cases
South Korea customer use SCR high efficiency low pressure compressor,save more for their operation cost

South Korea customer use SCR high efficiency low pressure compressor,save more for their operation cost

One of our customer in South Korea, they ever to use standard compressor for their factory processing, however, the compressor outlet pressure is higher than their machine pressure requirement, so with the help of our partner in South Korea

Permanent Magnetic compressor help customer save their electric cost

Permanent Magnetic compressor help customer save their electric cost

In 2015, SCR develop the new innovation oil cooling Permanent Magnetic compressor, which is the latest technology with fantastic energy saving solution for the compressor. The latest IP65 protection grade PM motor is best match for dusty en

SCR use two stage compressor to replace the customer old machinine

SCR use two stage compressor to replace the customer old machinine

Together with our partner in Europe, we use high efficiency two stage compressor to replace the customer old style compressor, and make contract with the customer to sell them compressed air, so customer no need to invest the equipment, they pay the cost according to the compressed air that they use, this is the mutual benefit for both side.

YOU MAY LIKE
Copyright ©Shanghai Screw Compressor Co., Ltd(SCR) All rights reserved. privacy statement terms & conditions SITEMAP Technical Support:NSW CNZZ